Planting and Growing Anthurium
| Care difficulty | 4 / 5 |
|---|---|
| Watering schedule | Water when the top 2 cm of compost feels dry; keep the root zone moist but not waterlogged. |
| Sunlight requirements | Bright indirect light |
| Ideal temperature | 18 – 27 °C |
| Soil type | Loam · Peat |
| Soil pH | Acid · Neutral |
| Soil moisture | Moist but well drained |
| Fertilizing | Every 2 weeks during the growing season (spring to summer) |
| Toxicity | All parts are toxic if ingested, containing calcium oxalate crystals. |
How to Water Anthurium?
Velvety anthurium needs a humid environment because it is not resistant to drought. During the summer, velvety anthurium should be watered twice a week, with half a glass of water each time. At the same time, maintain good drainage and use a sprayer to increase the humidity during the day. During the winter, water velvety anthurium once a week, with just under half a glass of water each time. It is recommended to water velvety anthurium in the morning, using rainwater or distilled water instead of tap water. This is because tap water contains many mineral salts of calcium and magnesium, and its long-term use can lead to salinization and hardening of the soil. The soil would become less permeable and this would affect the growth and appearance of the plants. If the leaves become withered and wrinkled, and the soil surface is dry, the plant may lack water and need to be watered. If the leaf tips turn yellow and become withered while the soil surface is wet, the plant may have been over-watered. The saucer the plant pot is standing in should have water added as necessary. If the soil surface is still wet, wait two or three days before watering again. Avoid having water remaining on the leaves after watering, so as to prevent sunlight burns and bacterial growth.
Learn more →What Are the Sunlight Requirements for Anthurium?
Velvety anthurium requires sufficient scattered light (not direct sunlight) and should be placed about 50 to 100 cm from a window when potted. Insufficient light will lead to a reduction in the photosynthetic rate, which decreases the growth rate, in turn decreasing the amount of flowering. New spathes may remain green if there is inadequate light, because the formation of anthocyanins and other such pigments will be inhibited. If more scattered light is provided, normal growth and color will resume. Direct sunlight will cause the leaves to turn yellow and wither from the tips and should thus be avoided.
Learn more →What Is the Ideal Temperature Range for Anthurium?
Velvety anthurium originates from tropical rainforests, in very humid conditions with continuous mist and rain. They are therefore adapted to a warm, humid environment. They grow at temperatures in the range of 16 to 30 ℃, preferably at about 20 ℃. The relative humidity of the air should be more than 80%. Low temperatures or dry environments should be avoided.
Learn more →What Soil Is Best for Anthurium?
Velvety anthurium requires well-drained but moist culture media that is rich in organic matter, with a pH of 5.5 to 6.5. Velvety anthurium has semi-fleshy aerial roots that are prone to rot in standing water, so it is recommended that permeable and loose culture media is used to plant them in, such as sphagnum moss or coco coir. Appropriate garden soil and organic matter can be added to improve the water retention of this culture media. An appropriate mixture would be 1/2 sphagnum moss plus 1/4 coco coir plus 1/4 garden soil, for example. Compost that is suitable for anthurium or orchids can also be purchased. It is recommended to repot once a year and replace the soil at least every two years to prevent water accumulation in the pot affecting plant growth.
- Soil type
- Loam · Peat
- Soil pH
- Acid · Neutral
What Are the Moisture Requirements for Anthurium?
Moist but well drained
Learn more →How to Fertilize Anthurium?
Velvety anthurium should be fertilized every three or four months. The early spring, when repotting is performed, is also the ideal time to add fertilizer. It is recommended that slow-release fertilizer is mixed in well with the culture medium. In the spring, the soil moisture is sufficient with little leaching by rainwater; the plant roots thus absorb and utilize the nutrients in soil highly efficiently. This can effectively promote plant growth. At other times of the year, liquid fertilizer can be applied, but there is no need to add fertilizer during the winter. Being over fertilized, their leaves may turn yellow. In this case, avoid adding fertilizer for a while. Besides, phosphorus fertilizers can be used to promote the flowering of plants.
Learn more →How to Prune Anthurium?
Any flowers or leaves that are turning yellow and dying off should be pruned as soon as possible, to avoid nutrient depletion and promote the growth of new flowers and leaves.
Learn more →How to Propagate Anthurium?
Propagate by division in spring when re-potting, separating rooted clumps with at least one growing point. Root stem cuttings in moist perlite or sphagnum moss at 20–25°C with high humidity until new growth appears.
Learn more →How to Transplant Anthurium?
Velvety anthurium thrives best when transplanted between early to late spring or during the mild conditions of early to late winter. Choose a location with bright, indirect light and consistent humidity. Ensure to transplant carefully to avoid root damage.
Learn more →How to Plant Anthurium?
Velvety anthurium should generally be repotted in the spring, because the differentiation of flower buds can be promoted during early spring due to the increased light and rising temperatures. It is recommended they are repotted into a pot that is 20% larger than their previous one. Soil and a little slow-release fertilizer, specialized for velvety anthurium, should be added if possible. The plant will then grow better. Phosphorus fertilizers can be added to encourage the production of more flowers.
Learn more →How to Harvest Anthurium?
Given a suitable environment, velvety anthurium can bloom all year round, every three months. Flowering may decrease during the winter due to the reduction in light. However, as the light levels gradually increase in the spring, velvety anthurium will wake up from its dormancy and the dark green leaves will appear, followed by another flowering period. The ornamental period of the flowers is relatively long. Each flower/spathe can be appreciated for one or two months before being cut. They then have a vase life of between 20 and 40 days. When picking the flowers, use sharp garden secateurs and cut the entire stalk. Prune the bottom of the stem at a 45° angle to increase the area for water absorption. Then, to avoid water loss, promptly put it in a vase with clean water.
Learn more →Common Pests & Diseases
Diseases
Susceptible to root rot in waterlogged compost; leaf spot may develop in stagnant, poorly ventilated conditions.
Pests
May be attacked by mealybugs, red spider mites and scale insects, especially when air is dry.
Explore the plant health library →Troubleshooting
Crispy Leaf Edges and Torn or Stunted Emerging Leaves
Anthurium magnificum is an epiphytic cloud-forest aroid from Colombia prized for its heart-shaped, velvety olive-green leaves with pale veins and four-angled (quadrangular) petioles; dry indoor air causes crispy margins and torn new leaves.
| What you notice | Possible explanation | What to check next |
|---|---|---|
| Velvety leaf margins turn brown and dry while the rest of the leaf stays deep green | Low ambient humidity (below 60%), dry drafts, or mineral/fertilizer salt buildup | Check room humidity, distance from air vents, and water quality. |
| Newly emerging leaves get stuck in the cataphyll, tear, or unfurl smaller than older leaves | Dry air or moisture swings during leaf expansion | Raise humidity around the plant and avoid prying stuck leaves open by hand. |
- Maintain steady ambient humidity (ideally 60% to 80%) using a humidifier or sheltered plant grouping alongside gentle airflow, avoiding water sitting on velvety leaves in stagnant air.
- Water with room-temperature rainwater, distilled water, or filtered water when the top inch of chunky mix approaches dryness, and flush salts occasionally.
- Provide bright, indirect light (such as near an east-facing window) out of direct midday sun, and keep temperatures between 18°C and 27°C (65°F to 80°F).
Anthurium magnificum is easily distinguished from similar-looking Anthurium crystallinum by its square/four-angled petioles (vs. round petioles in A. crystallinum).
Yellowing Leaves and Epiphytic Root Rot
Thick, velamen-covered epiphytic roots suffocate rapidly in dense soil, leading to root rot and yellowing foliage.
| What you notice | Possible explanation | What to check next |
|---|---|---|
| Lower or multiple leaves turn yellow while potting media stays wet or compacted | Overwatering, decomposed/dense potting mix, or root rot | Empty standing water and inspect the thick roots for brown, mushy decay. |
- Grow in an ultra-chunky, fast-draining epiphytic mix (coarse orchid bark, perlite, coco husk chunks, and a little sphagnum moss) in a pot with ample drainage.
- If roots have rotted, trim mushy roots with sterilized scissors and repot into fresh, airy mix.
- Wear gloves when pruning or repotting, as all parts contain insoluble calcium oxalate crystals and are toxic to pets and humans.
Feed lightly during warm active growth using a diluted balanced fertilizer at quarter to half strength.
The Toxicity of Anthurium
All parts are toxic if ingested, containing calcium oxalate crystals.