Jacklyn alocasia

How to Grow and Care for Jacklyn alocasia

Jacklyn alocasia · Alocasia tandurusa
Also known as: Jacklyn alocasia, Jacklyn elephant ear, Tandurusa alocasia

Grow in a free-draining, humus-rich aroid mix based on loam and peat with added perlite or sand. Provide bright indirect light, avoiding harsh midday sun that can scorch the leaves. Water regularly during active growth to keep the mix evenly moist but never waterlogged; reduce watering in winter and allow the top layer to dry slightly. Maintain high humidity and a warm active-growth temperature of 20–28°C, and overwinter at no less than about 15°C. Feed every 2–4 weeks with a balanced liquid fertiliser during spring and summer.

Watering: Keep soil evenly moist but not waterlogged; reduce watering in winterSunlight: Bright indirect lightToxic if chewed due to calcium oxalate crystals, causing oral irritation; keep away from children and pets.

Planting and Growing Jacklyn alocasia

Care difficultyInformation to be completed
Watering scheduleKeep soil evenly moist but not waterlogged; reduce watering in winter
Sunlight requirementsBright indirect light
Ideal temperature20 – 28 °C
Soil typeLoam · Peat · Sand
Soil pHAcid · Neutral
Soil moistureMoist but well drained
FertilizingEvery 2–4 weeks with balanced liquid fertiliser during spring and summer
ToxicityToxic if chewed due to calcium oxalate crystals, causing oral irritation; keep away from children and pets.
Care Tips

Grow in a free-draining, humus-rich aroid mix based on loam and peat with added perlite or sand. Provide bright indirect light, avoiding harsh midday sun that can scorch the leaves. Water regularly during active growth to keep the mix evenly moist but never waterlogged; reduce watering in winter and allow the top layer to dry slightly. Maintain high humidity and a warm active-growth temperature of 20–28°C, and overwinter at no less than about 15°C. Feed every 2–4 weeks with a balanced liquid fertiliser during spring and summer.

How to Water Jacklyn alocasia?

Keep soil evenly moist but not waterlogged; reduce watering in winter

Learn more →

What Are the Sunlight Requirements for Jacklyn alocasia?

Bright indirect light

Learn more →

What Is the Ideal Temperature Range for Jacklyn alocasia?

20 – 28 °C

Learn more →

What Soil Is Best for Jacklyn alocasia?

Soil type
Loam · Peat · Sand
Soil pH
Acid · Neutral
Learn more →

What Are the Moisture Requirements for Jacklyn alocasia?

Moist but well drained

Learn more →

How to Fertilize Jacklyn alocasia?

Every 2–4 weeks with balanced liquid fertiliser during spring and summer

Learn more →

How to Prune Jacklyn alocasia?

Remove yellowed or damaged leaves at the base with clean tools; cut back spent inflorescences if desired. Prune lightly in spring before active growth begins.

Learn more →

How to Propagate Jacklyn alocasia?

Propagate by dividing offsets (pups) from the mother rhizome in spring or early summer, when temperatures are consistently above 20°C. Carefully separate each division with roots and at least one growing point, pot in a free-draining aroid mix, and keep warm and humid until new growth appears. Seed propagation is possible but slow and rarely used in cultivation.

Learn more →

How to Plant Jacklyn alocasia?

Grow in a free-draining, humus-rich aroid mix based on loam and peat with added perlite or sand. Provide bright indirect light, avoiding harsh midday sun that can scorch the leaves. Water regularly during active growth to keep the mix evenly moist but never waterlogged; reduce watering in winter and allow the top layer to dry slightly. Maintain high humidity and a warm active-growth temperature of 20–28°C, and overwinter at no less than about 15°C. Feed every 2–4 weeks with a balanced liquid fertiliser during spring and summer.

Learn more →

Common Pests & Diseases

Diseases

Susceptible to root and rhizome rot if the substrate stays waterlogged, and to fungal leaf spots in cool, humid conditions. Good drainage and air movement reduce these problems.

Pests

Common pests include spider mites, mealybugs, thrips and scale insects, especially in dry indoor air. Inspect leaf undersides and petioles regularly.

Explore the plant health library →

Troubleshooting

Yellowing Lower Leaves, Root Rot, or Crispy Brown Edges

Jacklyn alocasia (Alocasia tandurusa) thrives in warm, humid conditions with evenly moist but airy soil; prolonged soggy compost suffocates roots, while dry indoor air or direct sun crisps leaf margins.

What you noticePossible explanationWhat to check next
Multiple lower or inner leaves turn yellow and limp while potting mix remains heavy and wetOverwatering, dense poorly drained compost, or cold drafts causing root/rhizome rotFeel two inches into the potting mix, check drainage holes, and verify room temperature stays above 15°C (59°F)
Leaf tips or margins turn brown and dry while center leaves stay green, or bleached patches appear on sunny sidesLow indoor air humidity, mineral/salt buildup, or harsh direct sun scorchCheck proximity to heaters/vents and whether midday direct sun hits the foliage
A single oldest outer leaf yellows gradually while sturdy new growth unfurls at the centerNormal age-related leaf turnoverConfirm the potting mix drains well and new leaves look healthy
  1. Pot in an airy, humus-rich, well-drained mix (amended with bark, perlite, or coarse grit) in a container with open drainage holes.
  2. Water properly: Keep soil evenly moist but not waterlogged; reduce watering in winter, and reduce watering during cooler winter months without letting the root ball desiccate completely.
  3. Provide bright indirect light out of scorching midday sun, boost ambient humidity with a pebble tray or humidifier, and keep away from cold drafts.

Stop watering and inspect roots if stems or rhizomes turn mushy at the soil line; trim decayed roots and repot into fresh airy mix.

Fine Webbing, Sticky Residue, or Leaf Spots

Warm, dry indoor air favors spider mites, mealybugs, and scale on Jacklyn alocasia (Alocasia tandurusa), while stagnant wet foliage encourages fungal or bacterial leaf spots.

What you noticePossible explanationWhat to check next
Speckled pale stippling with fine webbing under leaves, or white cottony clusters along petioles and veinsSap-sucking pests (Common pests include spider mites, mealybugs, thrips and scale insects, especially in dry indoor air. Inspect leaf undersides and petioles regularly.)Inspect leaf undersides, midribs, and petiole sheaths with a magnifier
Dark water-soaked or yellow-haloed spots expanding on leaves in cool, stagnant, humid conditionsSuspected leaf spot or fungal blight (Susceptible to root and rhizome rot if the substrate stays waterlogged, and to fungal leaf spots in cool, humid conditions. Good drainage and air movement reduce these problems.)Check whether water sits on leaves overnight and assess room airflow
  1. Isolate affected plants, wipe leaf surfaces and undersides gently with a damp cloth, and apply insecticidal soap or horticultural oil per label directions.
  2. Remove heavily spotted leaves at the base with sterilized shears, water at the soil surface rather than over the crown, and improve gentle air circulation.
  3. Keep foliage clean of dust so leaves photosynthesize efficiently.

Avoid spraying foliage in stagnant, cool rooms where leaves cannot dry within a few hours.

The Toxicity of Jacklyn alocasia

Toxic if chewed due to calcium oxalate crystals, causing oral irritation; keep away from children and pets.

More General Info About Jacklyn alocasia

Attributes of Jacklyn alocasia

Plant typeFoliage · Houseplants · Conservatory Greenhouse
Height0.8 - 1.5 metres
Spread0.6 - 1 metres
FoliageEvergreen
HabitUpright · Clump forming
OriginSulawesi, Indonesia

Scientific Classification

Species
Alocasia tandurusa
Genus
Information to be completed
Family
Araceae
More about Jacklyn alocasia →

FAQs About Jacklyn alocasia

What light, humidity, and soil does Jacklyn alocasia (Alocasia tandurusa) need?

Grow in bright indirect light away from scorching direct sun, using a humus-rich, airy, well-drained potting mix and moderate-to-high indoor humidity above 15°C (59°F).

How should I water and fertilize Jacklyn alocasia (Alocasia tandurusa)?

Keep soil evenly moist but not waterlogged; reduce watering in winter. During spring and summer active growth, every 2–4 weeks with balanced liquid fertiliser during spring and summer, reducing or pausing feeding in winter.

How do I prune and propagate Jacklyn alocasia (Alocasia tandurusa)?

For tidiness, remove yellowed or damaged leaves at the base with clean tools; cut back spent inflorescences if desired. prune lightly in spring before active growth begins.. To propagate, propagate by dividing offsets (pups) from the mother rhizome in spring or early summer, when temperatures are consistently above 20°c. carefully separate each division with roots and at least one growing point, pot in a free-draining aroid mix, and keep warm and humid until new growth appears. seed propagation is possible but slow and rarely used in cultivation..

Is Jacklyn alocasia (Alocasia tandurusa) toxic to pets or humans?

Yes, this plant is toxic or irritating (Toxic if chewed due to calcium oxalate crystals, causing oral irritation; keep away from children and pets.); keep it out of reach of children and pets and wear gloves when pruning.

More Info on Jacklyn alocasia Growth and Care

PlantCare

Your Ultimate Guide to Plants

Identify, grow and nurture the better way!

PlantCare plant identification and care illustration
PlantCare

Botanist in your pocket

Scan to download PlantCareDownload on the App Store

Scan the QR code with your phone camera to download the app